AAA Quench Oil

$128.88

The world’s most widely specified accelerated fast oil quenchant. It is capable of quenching a variety steels, sizes and shaped parts with little or no change in operating parameters. AAA Quench Oil achieves faster cooling rates through intensified action in the initial stages. This, and slower cooling through the martensitic transformation range, minimize distortion and ensures uniform maximum hardness to a greater depth. AAA Quench Oil is suitable for integral quenching and ideal for carbon, low and medium alloy steels. Automotive Approved.

Flash Point: 280 Deg F

Working Range: 75 – 120 Deg F

Viscosity @ 100 Deg F in cSt: 16

Available on backorder

Description

AAA Quench Oil – 5 Gallon Pail (Oil Based Quenchant)

CHARACTERISTICS:
This is a clear, gold colored product designed to provide maximum cooling rates for austenitized steels. Its formulation guarantees good stability due to its accelerator package which will not stratify out at any temperature nor can it be filtered out. It can be used as a quenchant from temperatures as high as 1750°F and is especially suitable for developing maximum oil-based hardness in medium and low alloy steels. It is widely used as a medium for carburized and carbonitrided work as well.

Our product is known as a fast style fluid, achieving rapid cooling rates in the nucleate boiling stage immediately following a short vapor phase. It also provides a slower cooling rate through the martensitic transformation range (Ms-Mf) than competitor’s fast oils. This ensures higher and deeper hardness levels are created without accompanying distortion of parts. Testing demonstrates a superior heat removal characteristics are the  difference between partial and complete hardening in actual practice.

Overall, distortion in oil quenched parts is proven to be caused by sluggish, non-uniform cooling rates. This is due to the thermal variations and mixed microstructures in the initial stages of the fluid which slower quench oils produce. A fast uniform quench is especially important in batch-type carbonitriding furnaces to provide all portions of the load becoming evenly hardened. The rate provided by AAA QUENCH OIL was designed to satisfy this requirement.
Additionally, this low viscosity oil drains off parts quickly resulting in less drag-out and is characteristically easier to wash off work after quenching. If left on, it provides a thin film of protection from rust.
You can use AAA QUENCH OIL with confidence. Your parts will achieve maximum oil quenched hardness with minimum distortion or cracking. Lastly, This product will produce exceptionally clean, bright work when used within its recommended temperature range.

Download: AAA Quench Oil (TDS)

Download: AAA Quench Oil (SDS)

Alternately you could try our 50 Quench Oil.

Additional information

Weight 36 lbs
Size

5 Gallons

Reviews

There are no reviews yet.

Be the first to review “AAA Quench Oil”

Your email address will not be published. Required fields are marked *

Post comment